New EMA pharmaceutical water quality guideline takes effect February 2021

The European Medicines Agency (EMA) on Monday issued a new guideline on the quality of water for pharmaceutical use that will replace its nearly two-decades-old guidance and position statement on water quality when it takes effect in February 2021.
Download here....

Comments

Post a Comment

Popular posts from this blog

USFDA Inspection Types

The FDA and States assisting the FDA under contract or cooperative agreements, in general, perform three types of inspections: surveillance, compliance follow up, and for-cause. Surveillance inspections are conducted to assess a facility’s or farm’s compliance with a regulation or to focus on an emerging trend in food safety. Surveillance inspections fall into two categories, routine and targeted. Routine inspections of facilities and farms are conducted to assess regulatory compliance. The FDA Food Safety Modernization Act mandates an inspection frequency of at least once every three years for domestic high-risk facilities and at least once every five years for non-high-risk facilities. In addition, the Food and Drug Omnibus Reform Act of 2022 mandated annual inspections of infant formula manufacturers in accordance with a risk-based approach. If necessary, inspections can be conducted more frequently. The FDA seeks to achieve comparable coverage of imported foods using an array of re...
Read more

Understanding Quantitative, Qualitative, and Limit Tests in Pharmaceutical Quality Control

In pharmaceuticals, quantitative, qualitative, and limit tests refer to different approaches for analyzing drugs and their components: 1 . Quantitative Test: This determines the exact amount or concentration of a specific substance in a pharmaceutical product. It provides precise measurements, such as the amount of active pharmaceutical ingredient (API) or impurities present. For example, assays like High-Performance Liquid Chromatography (HPLC) are used to quantify substances. 2. Qualitative Test: This identifies the presence or absence of a particular substance but does not measure its amount. These tests confirm the identity of the compound, ensuring that the correct API is present. Techniques such as Infrared (IR) spectroscopy or Thin Layer Chromatography (TLC) can be used for qualitative analysis. 3. Limit Test: This is a type of semi-quantitative test used to check whether the concentration of a substance (like impurities) in a sample is within prescribed limits. It doesn’t prov...
Read more

How to perform specificity during method validations?

  Specificity is one of the method validation parameter. Specificity defined by ICH Q2(R1), is as below, “Specificity is the ability to assess unequivocally the analyte in the presence of components which may be expected to be present.” So in the  context of specificity, the interested component must get explicitly assessed in presence of other sample components. To explain it further, let us take an example of a finished product such as tablets. Test solution of tablets consists of interested compounds (such as API and impurities) as well as the components which are of no interest (such as excipients). The excipients, though they are of no interest, one can’t completely remove them from test solution and hence it is important to assess their impact on quantification of analyte. Also, in case of assay analysis, the impurities will become the components of no interest and one must assess impurity interference while performing specificity. Let us understand how specificity is co...
Read more